The ARBIN LBT 21044 cycler has the following characteristics: 0~5V-100/10/1/0.1A-8CH-208V3P IV Module PN: 427270 Chassis Dimension(inch): 21W40D61H Three Phase Power Requirement: Voltage (VAC): 208 Max Power (VA): 8700 Max Current/Phase(A): 24 Circuit Breaker(A): 30. The cycler comes with the EIS INTEGRATION WITH GAMRY INSTRUMENTS’ 5000E A single channel Gamry system can interface with up to 32 of this LBT’s I/V channels, allowing the use of EIS measurements across LBT channels. While the Gamry cannot perform EIS measurements on all 32 LBT channels simultaneously, it can perform EIS measurements on-demand, or sequentially, based on the test protocol.

FLIR A70 smart sensor camera is ideal for users who want built-in, on-camera analytics and alarm capabilities for condition monitoring and early fire detection applications. With options for Wi-Fi, an integrated visual camera, and ONVIF S compatibility, FLIR A70 cameras are a flexible, configurable solution to meet unique needs across a broad range of industries and academia. The camera provides thermal characteristics with the wide-area, noncontact temperature sensor, which provides up to 640 × 480 (307,200 pixels) resolution and ±2°C accuracy.

The BHD-508 thermal chamber with temperature and humidity control is an ideal solution for the thermal testing of various batteries. The chamber has the following characteristics: Temperature range: -37°C to 180°C (-34.6°F to 356°F), Temperature stability: ±0.5°C (±1.0°F) at sensor after stabilization, Refrigeration: Single stage, IEC Rise Rate: 2.82°C/minute, IEC pull down rate: 1.2°C/minute, Humidity range: 10-95% RH, limited by +4°C Td (for 98% add option), Humidity fluctuation: ±2% RH at sensor measured at sensor. The chamber is upgraded with three safety packages. The first one is the emergency stop button, which is connected to the cycler through the software kit. The second safety package is the rapid temperature change sensor, which is also integrated through the software with the thermal camera for temperature reading. The third safety package is the pressure release sensor with the inert gas purge option. It should be also noted that the chamber's stainless-steel interior and the door are reinforced. In addition to all these safety features, the chamber window is made of C-plane optical grade sapphire with AR coating for a non-obstructing thermal images acquisition.